Home Archiveaaa News Contact
More Filters
International Conference on Contemporary Theory and Practice in Construction XVI

Vol 16, Issue 1,2024

International Conference on Contemporary Theory and Practice in Construction XVI

Vol 15, Issue 1,2022

International Conference on Contemporary Theory and Practice in Construction XVI

Vol 14, Issue 1,2020

International Conference on Contemporary Theory and Practice in Construction XVI

Vol 13, Issue 1,2018

The photogrammetric survey of buildings is a beneficial process to obtain accurate 3D data for facade inspection. It allows more straightforward monitoring of the state of the facade over time. An orthomosaic with an average ground sampling distance of 2.1 mm is created using close-range unmanned aerial vehicle photogrammetry. Ground control points...

By Nikola Santrač, Mehmed Batilović, Marko Marković, Miro Govedarica, Pavel Benka

The main research problem relates to the possibilities of applying contemporary principles of cultural heritage preservation in practice. Its examination is the focus of teaching in cultural heritage preservation at the Faculty of Architecture in Belgrade. In the case study of the Military Kitchen within the Belgrade Fortress, and through the devel...

By Ena Takač, Jelena Šćekić, Marko Nikolić

City Information Modelling (CIM) seeks to evolve Building Information Modelling (BIM) into urban planning and design practices that are today dominated by Geographic Information Systems (GIS). The design toolbox in GIS software does not relate to urban design elements (streets, sidewalks, buildings, lots, etc.) or urbanist parameters. Urban designe...

By Todor Stojanovski

According to the Law on Spatial Development and Construction of the Republic of Srpska, the spatial plan of the Special Purpose Area of the Republic of Srpska is adopted mandatory for national parks and other areas if this is determined by documents of a higher order or wider area. The Spatial Plan of the Special Purpose Area of the Republic of Srp...

By Dijana Gvozden Sliško, Marko Ivanišević, Neda Živak

In this paper, the control of the geometry of a bridge located in Kula, Serbia, was performed. This bridge bridges the Danube-Tisa-Danube canal and is a part of road 108 that runs from Bačka Topola to the Croatian border. In order to perform the geodetic control of the bridge's geometry, terrestrial laser scanning of the bridge was conducted, where...

By Mehmed Batilović, Marko Marković, Vladimir Bulatović, Đuro Krnić, Nikola Santrač

Laser scanning is one of the most modern technologies used for the mass collection of spatial data in the form of coordinates of points in space. Given that laser scanning is often used during the restoration of buildings and building facades, the paper describes the application of mobile laser scanning in the example of the reconstruction of the B...

By Jovana Popović, Sanja Tucikešić, Tanja Đukanović, Miodrag Regodić

The Budva bypass, spanning approximately 30 kilometers, is divided into three distinct sections: North, Middle, and South. The Terms of reference required the preparation of a Preliminary design for the construction elements of all structures along the section and route. The Southern section, which is the subject of this article, begins at the end ...

By Željka Beljkaš, Biljana Ivanović, Njegoš Beljkaš, Mladen Gogić, Nikola Knežević

A theoretical model for porous viscoelastoplastic (VEP) materials under dry conditions is examined based on the principles of mass and energy conservation using rheological-dynamical analogy (RDA). The model provides the expressions for the creep coefficient, Poisson's ratio, modulus of elasticity, damage variable and strength in the function of po...

By Dragan Milašinović, Nataša Mrđa Bošnjak

Information Technologies are lieders in the fast industrial development. Virtual Prototyping, as relatively young technology, is combination of Virtual Reality and computer technologies with digital prototypes as result. It represents original's true copy in the real world, providing more efficient models' testing, prior construction. With it's imp...

By Mihailo Ostojić, Milivoje Rogač

Prior to building retrofitting, thermal performance assessment of the building is essential. An adequate assessment can provide useful insights to heat-losses and envelope anomalies i.e. thermal bridges, mold, air infiltration etc. The most important physical quantity that needs to be defined is the thermal transmittance (U-value) which is the key ...

By Slobodan Peulić, Darija Gajić, Jelena Kljakić, Biljana Antunović

The International Conference on Contemporary Theory and Practice in Construction XV aims to connect science, profession and education in the broad field of construction with an emphasis on the process of integrality and interdisciplinarity