3D MODELS BASED ON UAV IMAGES AND GNSS TECHNOLOGY IN THE FIELDS OF ARCHITECTURE, CIVIL ENGINEERING, SPATIAL PLANNING, AND ENERGETICS
The paper presents projects in the fields of architecture, spatial planning and energetics, in order to analyze the quality of 3D terrain models obtained by combining photogrammetry using drone images (UAV) and terrestrial measurements obtained by GNSS technology. In terms of geometric accuracy, the geometry of the reconstructed point clouds was co...
By Stefan Jovanović, Sanja Tucikešić
ANALYSIS OF REVITALIZATION AND CONVERSION OF CULTURAL AND HISTORICAL SITES ON THE EXAMPLE OF RENZO PIANO BUILDING WORKSHOP-PATHE FOUNDATION
Designing and building a new building in a historic city block is connecting modern and contemporary architecture with existing historically significant buildings. The Pate Foundation of the Renzo Piano Buiding Workshop design team is located in Paris, France. The subject of research of this paper would refer to the analysis of revitalization and c...
By Jovana Vukanić
APLICATION OF THE PRINCIPLES OF INTEGRATED PLANNING IN THE URBAN PLAN OF BANJALUKA 2020–2040 WITH A FOCUS ON THE SUSTAINABLE USE OF NATURAL RESOURCES
The application of the principle of integrated planning is the basis of modern planning aimed at sustainable and resilient built environments. It refers to an adequate methodological framework and procedural steps of planning, as well as to the satisfactory general social conditions in which spatial planning takes place, which, especially in transi...
By Brankica Milojević
INFLUENCE OF MATERIAL SURFACE ROUGHNESS ON BACKSCATTERING IN LASER SCANNING
In this paper, the possibility of applying Kirchhoff 's scalar approximation model for determining the backscattering coefficient from rough surfaces is investigated. Surfaces of dielectric and metallic materials, which have low roughness are considered. Based on the roughness parameters and electrical properties of these materials, the backscatter...
By Anastasija Martinenko, Ljiljana Brajović, Miodrag Malović
DESIGNING OF CONTINUOUS DAM MONITORING USING GLOBAL NAVIGATION SATELLITE SYSTEMS
The paper presents the procedure for designing a geodetic system for continuous dam monitoring and equipment necessary for the application of the Global Navigation Satellite System (GNSS). It also points out the conditions that must be respected when choosing the position of the network points and indicates the advantages and disadvantages of this ...
By Slavko Vasiljević, Branko Milovanović
ANALYSIS AND EVALUATION OF THE THERMOPHYSICAL PROPERTIES OF VENTILATED FAÇADE TYPOLOGIES
The energy efficiency of the construction sector is denoted by the European energy and environmental policies, by international standards and national legislation. Ventilated facades can contribute towards more efficient buildings, hence this paper focuses on the evaluation of ventilated façade construction typologies and the impact of therm...
By Georgios Chantzis, Maria Symeonidou, Panagiota Antoniadou, Effrosyni Giama, Sofia-Natalia Boemi, Stella Chadiarakou, Agis Papadopoulos
SETTING THE REAL-TIME FLOOD FORECASTING MODELS IN UKRINA, TINJA AND BRKA UNGAUGED BASINS
Flood forecasting (FF) is one of the most challenging problems in Hydraulic Engineering. It is also most important due to tremendous contribution in reducing economic and life losses that usually occurs during flooding. Major part of the FF system is hydrologic and hydraulic model that simulate runoff and corresponding water levels in rivers, based...
By Žana Topalović, Nikola Rosić, Job Udo
GENDER DIFFERENCES IN THE ACHIVEMENTS OF CIVIL ENGINEERING STUDENTS
The paper analyzes gender differences in the length of study and average grade between the number of enrolled and graduated students at the Faculty of Architecture, Civil Engineering and Geodesy in Banjaluka, during the period from 1996 to 2015. It was concluded that women, in civil engineering studies, are just as successful as men. However, it is...
By Sandra Kosić-Jeremić, Miroslav Malinović, Snježana Maksimović, Đorđe Stojisavljević, Ljubiša Preradović
PARAMETRIC ANALYSIS ON FIRE RESISTANCE OF ONE WAY SIMPLY SUPPORTED REINFORCED CONCRETE SLABS
The behavior of simply supported reinforced concrete slabs in fire conditions and the influence ofcertain parameters on their fire resistance is analysed in this paper. The influence of the slab span,concrete cover thickness and the type of reinforcement scheme are analysed. All slabs are exposedto standard fire ISO 834. The analyses are conducted ...
By Fidan Salihu, Meri Cvetkovska
VERIFICATION, CALIBRATION AND CONFORMITY ASSESSMENT OF ROTATING LASERS APPLIED IN BUILDING AND SURVEYING MEASUREMENT TASKS
This paper specifies field procedures described by international norm ISO 17123-6, to be adoptedwhen determining and evaluating the quality of rotating lasers and their ancillary equipment whenused in building and surveying measurements for levelling tasks. It will be shown analysis andstatistical tests in order to check the conformity of the equip...
By Ankica Milinković, Sanja Tucikešić, Kornelija Ristić