ROUTE OF SOUTH SECTION OF BUDVA BYPASS - REVIEW OF PRELIMINARY DESIGN OF ORGANIZATION AND TECHNOLOGY CONSTRUCTION
The Budva bypass, spanning approximately 30 kilometers, is divided into three distinct sections: North, Middle, and South. The Terms of reference required the preparation of a Preliminary design for the construction elements of all structures along the section and route. The Southern section, which is the subject of this article, begins at the end ...
By Željka Beljkaš, Biljana Ivanović, Njegoš Beljkaš, Mladen Gogić, Nikola Knežević
OPTIMIZATION OF PURLINS CROSS-SECTION EXPOSED TO FIRE
In practice, consideration of fire protection for structural elements mainly occurs after the adopted dimensions of sections. However, this procedure leads to not the most cost-effective solution in general. To find the optimal solution, it is necessary to apply one of the optimization methods. The presented optimization of purlins RHS cross-sectio...
By Milan Bursać, Svetlana Kostić
APPLICATION OF CLOSE-RANGE UAV PHOTOGRAMMETRY IN THE DETECTION OF CRACKS ON FACADE
The photogrammetric survey of buildings is a beneficial process to obtain accurate 3D data for facade inspection. It allows more straightforward monitoring of the state of the facade over time. An orthomosaic with an average ground sampling distance of 2.1 mm is created using close-range unmanned aerial vehicle photogrammetry. Ground control points...
By Nikola Santrač, Mehmed Batilović, Marko Marković, Miro Govedarica, Pavel Benka
GEODETIC CONTROL OF THE GEOMETRY OF THE BRIDGE IN KULA USING TERRESTRIAL LASER SCANNING TECHNOLOGY
In this paper, the control of the geometry of a bridge located in Kula, Serbia, was performed. This bridge bridges the Danube-Tisa-Danube canal and is a part of road 108 that runs from Bačka Topola to the Croatian border. In order to perform the geodetic control of the bridge's geometry, terrestrial laser scanning of the bridge was conducted, where...
By Mehmed Batilović, Marko Marković, Vladimir Bulatović, Đuro Krnić, Nikola Santrač
SAFETY REQUIREMENTS FOR TUNNELS REGARDING THE TRANSPORT OF DANGEROUS GOODS (ADR)
EU Tunnel Directive 2004/54/EC aims to ensure a minimum level of safety for users in road tunnels in the Trans-European Road Network. EU member states are required to develop, at national level, their own detailed methodology for tunnel risk assessment. Along with that, ADR as the UN regulation in the field of dangerous good transportation by road,...
By Snežana Petković, Valentina Golubović Bugarski, Nataša Kostić
INNOVATIONS IN ARCHITECTURE: RESEARCH, DESIGN AND TECHNOLOGY
Architectural designers are currently faced with many challenges—technological changes, environmental and economic impacts, necessity to innovate and raise the bar in building performance, and the paradigm shift in architecture with the wider adoption of advanced computational design and fabrication techniques. This paper focuses on innovatio...
By Ajla Akšamija
ANALYZING ZONES FOR STANDING: ENHANCING VIBRANCY DURING PUBLIC EVENTS
This study examines how parts of the public space that offer the possibility for standing contribute to vibrancy during public events. The aim of the paper is to investigate how different arrangements of temporary structures affect the positions of potential zones for standing and, therefore, the vibrancy of public spaces. Using Trg Slobode (Libert...
By Tanja Mitrović, Milica Vračarić
CRUSTAL DEFORMATIONS AND THEIR IMPACT ON THE REALIZATION OF A NATIONAL COORDINATE REFERENCE SYSTEM: CASE STUDY AETOLIA-ACARNANIA, WESTERN GREECE
Geodesy and crustal deformations are closely related. On the one hand, geodetic techniques are used to estimate deformations contributing in this way to geology, seismology and geodynamics. On the other hand, deformations consist a major challenge in the maintenance of geodetic reference frames. In this work we use GNSS (Global Navigation Satellite...
By Michail Gianniou, Antonios Charalampous
THE CENTRE OF CIRCLE DETERMINATION BY GEODETIC MEASUREMENTS
The problem of circle’s centre determination by using geodetic data is related with influences of inevitable errors as a result of measurement process as well as with the issue of model’s influence itself. In this research the experiment was conducted with aim to find out the influence of measurements error and the influence of model fo...
By Žarko Nestorović, Milan Trifković, Miroslav Kuburić
ARCHITECTURAL PHOTOGRAMMETRY APPLIED TO THE CATALOGING OF HISTORICAL HERITAGE. A CASE STUDY OF A BUNKER IN LA LÍNEA DE LA CONCEPCIÓN, SPAIN
Photogrammetry is an emerging tool in architecture, conservation, cataloging, and maintenance of heritage, offering a precise and efficient methodology for generating three-dimensional digital models. This work presents a comparative study of photogrammetric methods, focused on a lowcost software application, with the aim of evaluating its effectiv...
By Antonio Martín-Cara, José-Lázaro Amaro-Mellado, Beatriz Zapico-Blanco