This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
In this paper, the analysis of the dynamic load of the beam using geodetic and geotechnical sensors was performed. From the group of geodetic sensors, GPS/GNSS receivers were used, while from the group of geotechnical sensors, an accelerometer was used. The measurements were performed in laboratory conditions, and the experiment itself was designed so that the measurements from several series were independent of each other. For the experiment, a construction was made on which all sensors are mounted, which ensures their smooth operation in real time, as well as the setting of different loads. Based on the obtained measurement results, the analysis was performed and conclusions were drawn, as well as the directions of future development.
The statements, opinions and data contained in the journal are solely those of the individual authors and contributors and not of the publisher and the editor(s). We stay neutral with regard to jurisdictional claims in published maps and institutional affiliations.
